The All-In-One Brick & Paver Cleaner

BrickTastic is an industrial-strength, cleaning and degreasing concentrate for clay brick, concrete pavers, cobblestone, granite, and other masonry surfaces. BrickTastic penetrates through tough stains and works below the surface, cleaning bricks and pavers from the inside out. Able to cut through oil, grease, leaf tannins, tree sap, carbon, soot, creosote, and other organic stains with ease, BrickTastic is the only brick cleaner you’ll need.

And its versatility? Unmatched! Apply with a pressure washer, rotary scrubber, mop, brush, or hand sprayer, BrickTastic tackles any cleaning challenge in your industrial, residential, or commercial setting.

But power doesn’t have to come at a cost. BrickTastic’s concentrated formula lets you dilute for ultimate effectiveness and economy. The free-rinsing formula leaves no streaking or residue behind.

The BrickTastic Advantage

The unique formula tackles tough stains and leaves your brickwork and pavers looking their best. Whether you’re looking to restore the original appearance of a historic brick building or cleaning soot from a brick fireplace in your home, BrickTastic is the best brick cleaner for the job.

• Safe for Virtually All Surfaces: BrickTastic will not etch or cause discoloration. Non-abrasive formula is tough on stains but gentle on surfaces.
• Economical: Super-concentrate can be diluted with water to match the job.
• Non-Hazardous: No skull and crossbones! Non-hazardous, non-flammable, and acid-free. Use outdoors or on interior brick.
• Free Rinsing: Simply rinse the surface with water when finished cleaning. BrickTastic leaves no residue. Ideal for cleaning surfaces before applying a sealer or decorative coating.
• Multi-Purpose Cleaner: Works like magic on virtually all organic stains: oil, BBQ grease, soot, tire marks, latex/acrylic paints and adhesives, mold and algae stains, tree sap, graffiti, leaf stains, and more.

Commercial Brick Cleaner

Brick Buildings and Facades

Public Parks / Amusement Parks

Shopping Centers and Malls

Parking Lots & Garages

Historical Brick Structures

Gas Stations and Drive-throughs

Outdoor Eating Areas and Restaurants

Residential Brick Cleaner

Brick Homes and Chimneys

Patio Paver Cleaner

Pool Deck Cleaner

Pizza Ovens & BBQ Areas

Fireplace Brick Cleaner

Retaining walls and hardscaping

Dilute to Match Your Needs

BrickTastic comes as a powerful concentrate. Simply dilute with water to suit the job.

LIGHT CLEANING: Dilute with water 20:1. Coverage for this strength solution is 1,000 sq.ft per gallon of cleaner.

NORMAL CLEANING: Dilute with water 10:1. Coverage for this strength solution is 1,000 sq.ft per gallon of cleaner.

HEAVY CLEANING: Dilute with water 5:1. Coverage for this strength solution is 500 sq.ft/gallon of cleaner.

EXTRA HEAVY CLEANING & PAINT STRIPPING: Use straight or dilute with water 1:1 . Coverage for this strength solution is 100-200 sq.ft/gallon of cleaner.

USE BRICKTASTIC WITH A PRESSURE WASHER: A pre-mixed solution of 1:5/20 can be drawn from an auxiliary tube or put directly into the mixing tank.

Cleaning Brick & Paver Surfaces with BrickTastic

BrickTastic is a water-based cleaning solution that is designed to remove dirt, grime, and other stubborn stains from brick and paver surfaces. With this highly concentrated formula, cleaning dirty bricks has never been easier. Simply dilute the solution to match the job, spray on, agitate, and then rinse away for a bright and refreshed look.

1. Dilute the product: Depending on the level of dirt and grime, dilute BrickTastic to match the job. Follow the instructions on the product label for the recommended dilution ratio.
2. Spray the solution: Using a garden sprayer, apply the diluted brick cleaner evenly to the surface of the dirty bricks. If you are working on a smaller area and spray application is not practical, simply apply using a mop, scrub brush, or pour directly onto the surface.
3. Agitate the surface: Using a stiff bristled brush, gently scrub the bricks to help loosen dirt and grime. For more stubborn stains, let the brick cleaner sit for a few minutes to allow it to penetrate.
4. Rinse the surface: Once the dirt and grime have been removed, rinse the bricks thoroughly with water to remove any remaining solution.
5. Repeat if necessary: For very dirty bricks, you may need to repeat the process until the bricks are cleaned to your satisfaction.

Note: Always test BrickTastic in an inconspicuous area before using it on the entire surface.

TIP – Keep the surface wet. For deep stains, cover the treated surface with a tarp to allow the cleaner to dwell on the surface.

FAQ

Preserving Brick & Pavers with LastiSeal

The preservation and long-term maintenance of your brick surfaces go hand in hand with using a high-quality sealer like LastiSeal Brick & Concrete Sealer. By applying LastiSeal, you not only create a below-the-surface waterproofing barrier that resists water, salts, and stains, you actually bind and harden the brick and paver.

This not only keeps your brick cleaner by preventing dirt and grime from penetrating the surface but also helps minimize the growth of mold, algae, and other organic buildups. With LastiSeal’s superior sealing properties, your brick surfaces become more resistant to wear and tear, making them easier to clean and maintain over time. It’s a smart investment for both the longevity and aesthetics of your brick structures.

• Long-Lasting Protection: LastiSeal forms an impenetrable barrier that helps to keep dirt, grime, and other contaminants from penetrating your brick, making it easier to clean in the future. LastiSeal is the only 15-year sealer on the market.
• Improved Durability: LastiSeal also helps to prevent water damage, freeze-thaw damage, and other types of wear and tear that can damage your brick over time. Unlike silane/siloxane sealers, LastiSeal measurably hardens bricks and pavers and makes the stronger and more durable.
• Saves Time & Money: By sealing your brick with LastiSeal, you’ll reduce the frequency and severity of future cleaning efforts, saving you time and money in the long run.
• Enhanced Appearance: LastiSeal FLAT gives your brick a beautiful, natural finish, while LastiSeal SATIN provides a subtle, low-gloss sheen that enhances its overall appearance and adds to its curb appeal.